Low pressure elements KH 4040-C1M1

Ámbito de aplicación

Brackish water up to 2 g/l

Modelo	A, mm	B, mm	B' (ATD), mm	C, mm	D, mm	Peso, kg
KH 4040-C1М1	1016.00	100.00	0.00	19.10	26.70	4.05

Descripción del producto

Material de la membrana	Composite polyamide
Tipo de la membrana	ОРМ32КМ
Diseño	Spiral wound
Función	Desalination of brackish water

Especificación

Modelo	Productividad, GPD	Selectividad, %	Área		Generador de vórtices
Modelo	Productividad, GPD	Selectividad, %	m²	ft²	mm	mil
KH 4040-C1М1	2 400	99.40 / 99.20	8.00	86.00	0.72	28.00

TEST CONDITIONS: test solution of NaCl 1500 mg/l, P=1,0 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.

Condiciones de funcionamiento y datos técnicos para el diseño

1) During continuous work with pH over 10,5 the temperature must not exceed 35°С 2) Flow of each element in a batch may vary +/-15% *In case of chemical cleaning with a solution pH exceeding 11,5 or at the temperature level more than 45°С please contact original manufacturer for consultation.