High rejection membrane element KM 8040-C(1,2,3)M1

Ámbito de aplicación

Sea and highly mineralized water up to 45 g/l

Modelo	A, mm	B, mm	B' (ATD), mm	C, mm	D, mm	Peso, kg
KM 8040-C1M1	1016.00	200.10	0.00	28.60	0.00	16.60
KM 8040-C2M1	1016.00	200.10	0.00	28.60	0.00	17.65
KM 8040-C3M1	1016.00	200.10	0.00	28.60	0.00	17.65

Descripción del producto

Material de la membrana	Composite polyamide
Tipo de la membrana	ОРМ45КM
Diseño	Spiral wound
Función	Sea water desalination

Especificación

Modelo	Productividad, GPD	Selectividad, %	Área		Generador de vórtices
Modelo	Productividad, GPD	Selectividad, %	m²	ft²	mm	mil
KM 8040-C1M1	8 000	99.80 / 99.60	39.00	420.00	0.72	28.00
KM 8040-C2M1	7 600	99.80 / 99.60	37.00	400.00	0.79	31.00
KM 8040-C3M1	7 100	99.80 / 99.60	35.00	375.00	0.86	34.00

TEST CONDITIONS: test solution of NaCl 32 g/l, P=5,5 MPa, T=25°C , pH=7,5. Recovery - 10%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.

Condiciones de funcionamiento y datos técnicos para el diseño

1) During continuous work with pH over 10,5 the temperature must not exceed 35°С 2) Flow of each element in a batch may vary +/-15% *In case of chemical cleaning with a solution pH exceeding 11,5 or at the temperature level more than 45°С please contact original manufacturer for consultation.