•  English
  •  Русский
  •  中國
  •  Español
  • CONTACT US

Brackish water

Low pressure elements KH 4040-C1M1 ro-009

Brackish water up to 2 g/l

Application Desalination of brackish water
Rejection, nom/min, % 99.40 / 99.20
Flux, GPD 2 400
Test conditions TEST CONDITIONS: test solution of NaCl 1500 mg/l, P=1,0 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.
Low pressure elements KH 8040-C1M1 ro-010

Brackish water up to 2 g/l

Application Desalination of brackish water
Rejection, nom/min, % 99.20 / 98.80
Flux, GPD 11 500
Test conditions TEST CONDITIONS: test solution of NaCl 1500 mg/l, P=1,0 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.
Extra low pressure elements KCH 4040-C (F) ro-013

Tap and low-mineralized water up to 1 g/l

Application Desalination of brackish water
Rejection, nom/min, % 99.10 / 98.30
Flux, GPD 2 600
Test conditions TEST CONDITIONS: test solution of NaCl 500 mg/l, P=0,69 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.
Extra low pressure elements KCH 8040-C (F) ro-014

Tap and low mineralized water up to 1 g/l

Application Desalination of brackish water
Rejection, nom/min, % 99.10 / 98.30
Flux, GPD 12 400
Test conditions TEST CONDITIONS: test solution of NaCl 500 mg/l, P=0,69 MPa, T=25°C , pH=7,5. Recovery - 15%

Nominal rejection is reached after 48 hours of continuous operation on test solution.

Minimal rejection of a new element after 20 minutes test on test solution.
High rejection elements KC 8040-C(1,2,3)М1 ro-031

Brackish water up to 5 g/l

Application Brackish water up to 5 g/l
Rejection, nom/min, % 99.70 / 99.50
Flux, GPD 11 500
Test conditions NaCl test solution 1500 mg/l, P=1.5 MPa, T=25°C, pH=7,5. Permeate recovery rate is 15%.
High rejection elements KC 4040-C(1,2,3)M1 ro-030

Brackish water up to 5 g/l

Application Brackish water up to 5 g/l
Rejection, nom/min, % 99.70 / 99.50
Flux, GPD 2 500
Test conditions NaCl test solution 1500mg/l, P=1,5 MPa, T=25°C, pH=7,5. Permeate recovery rate is 15%.