•  English
  •  Русский
  •  中國
  •  Español
  • CONTACT US

NanoUF 4040-F50

 

Application

Surface water and artesian water

Model A, mm B, mm B' (ATD), mm C, mm D, mm Weight, kg
4040-F50-1 1016.00 101.60 100.30 19.10 26.70 3.60
4040-F50-2 1016.00 101.60 100.30 19.10 26.70 3.60
4040-F50-3 1016.00 101.60 100.30 19.10 26.70 3.60

Product description

Feature Reinforced by tape (-T)
Membrane material Polysulfone
Membrane type URM-50
Design Spiral wound
Application Surface water and artesian water

Specification

Model Rejection, % Area Spacer
m2 ft2 mm mil
4040-F50-1 98.00 / 0.00 8.00 86.00 0.71 28.00
4040-F50-2 98.00 / 0.00 7.70 83.00 0.79 31.00
4040-F50-3 98.00 / 0.00 7.40 80.00 0.86 34.00

0.1% albumin solution (69 kDa) in 0,9% NaCl solution, Р=0,1 MPa, Т=25С. Permear recovery rate is 15%
Membrane`s specific flow by demineralized water (SDI<1)is min. 150 l/(hr*m2*0,1 MPa)


Operating conditions and technical data for designing
Maximum pressure drop, MPa 0,1
Operation temperature, С 4-50
рН at operation 1-12
рН at chemical cleaning (short time operation) 1-13
Acceptable Hydrogen peroxide concentration during continuous operation, mg/l 20
Acceptable Hydrogen peroxide concentration during disinfection (not longer than 30 min, +25°C), mg/l 500
Acceptable free Chlorine concentration during continuous operation, mg/l 1
Acceptable free Chlorine concentration during disinfection (not longer than 30 min, +25°C, pH 10,5), mg/l 200
Concentrate/permeate ratio on each element, min 5:1
Turbidity, NTU max 20
Maximum feed flow, m3/hr 18
Colour value, max 50